Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Axiom external monitor support

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom external monitor support
11-02-18, 01:31 PM (This post was last modified: 11-02-18 01:31 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Axiom external monitor support
Welcome to the Raymarine Forum George,

Those seeking a wired interface are recommended to consider an Axiom XL MFD, as they feature an HDMI video output port. Axiom and Axiom Pro MFDs are limited to sharing video via Miracast and will not support a wired video path between an Axiom or Axiom Pro MFD and a TV/monitor. While most customer find the Miracast solution to be quite reliable, interference from other electronics (ex. saturated channels from nearby routers in your environment, etc.) may occur. For those seeking a 100 percent solution, then a wired video path (i.e. Axiom XL) would be recommended.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Axiom external monitor support - Chuck - Raymarine - Moderator - 11-02-18 01:31 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication