Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] A65 Compatability

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] A65 Compatability
11-09-18, 01:59 PM
Post: #14
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] A65 Compatability
Tim,

The part number for the SeaTalk to SeaTalkng Converter Kit is E22158. An appropriate length of SeaTalkng Spur Cable (6m max length) will be required to connect the MFD to one of the spur sockets of the SeaTalk to SeaTalkng Converter. As the SeaTalk bus is presently powered, it will not be necessary to install the supplied SeaTalkng power cable. Instead, simply unplug the SeaTalk cable from the RC530 and connect it to a D244 SeaTalk Junction block. The SeaTalk to SeaTalkng Converter Cable will then be used to connect the D244 SeaTalk Junction Block to the SeaTalk (yellow) socket of the SeaTalk to SeaTalkng Converter.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] A65 Compatability - morepower - 09-29-18, 02:06 AM
RE: [CA11] A65 Compatability - Chuck - Raymarine - Moderator - 11-09-18 01:59 PM

Forum Jump:


User(s) browsing this thread: 4 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication