[CA] [CA11] Limited Engine data from 2007 Suzuki

[Chuck - Raymarine - Moderator]

mlindel,

The diagram which you have supplied may not be consistent with the method of interfacing engines to Raymarine MFDs specified within the FAQ found here. In short support is limited to engine systems which have been interfaced to the marine electronics backbone via a microprocessor based engine gateway, not a simple cable.

The NMEA 2000 diagnostics within LightHouse 3 are somewhat limited. In such situations, it is typically recommended that a NMEA 2000 analyzer (ex. Actisense NGT-1 w/NMEA Reader PC software) be interfaced to the backbone and that the analyzer be used to determine whether engine data PGNs are present on the backbone and if so, what Instance ID is being transmitted within the corresponding PGNs. Such analyzers convert the hexadecimal data stream into human readable data.