Display Generator Data

[[email protected]]

I have a e127 and a Onan generator broadcasting its engine data over the SeaTalk/NMEA2k network via a maretron J1939/N2k converter. I confirmed using N2kView that the generator is broadcasting its data and is utilizing engine instance "2". the port + starboard engines are instance 0/1 respectively. My third party display is able to see this generator data as "Engine 3", however none of the Raymarine displays are able detect the engine data. I setup the raymarine display for 3 engines and ran through Engine setup and it only detects the volvo engines (port/starboard) and not the generator engine data.

One thing to note, the generator does not broadcast its RPM but has all other engine data (hours, temp, oil pressure, voltage).