[CA] [CA11] Axiom STW

[Chuck - Raymarine - Moderator]

Marty,

Did you select the STW source per the command sequence specified within my prior response? Did you also specify within the Fishfinder application settings of the 50kHz or 200kHz channel that a B744V transducer has been interfaced to the system. If so and the problem persists, then please note that a speed source is being detected as the reported speed is 0.0 instead of dashes ... when the vessel is moving through water? If so, then this may then indicate that the paddle wheel may be fouled or the speed sensor portion of the transducer has failed. Accordingly, it is recommended that the speed/temp insert be pulled, inspected for fouling and to ensure that the paddle wheel rotates freely. If so, then the speed insert should be tested ... rapidly spinning the paddle wheel should result ins sensed STW. If not, then the transducer's speed/temp insert should be replaced.