[CA] [CA11] Raymarine SR150 antenna light flashing green

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum InsuredApple,

When the SR150's receiver detects that it has been interfaced to an antenna, its Antenna status LED will be illuminated green and not be flashing. While it is possible that the reported issue may be rooted in a failure of the SR150's receiver, it is also quite possible that the SR150's cable or the antenna itself may have been damaged when its antenna was relocated. While the SR150 may be sent to Raymarine’s Product Repair Center to be bench checked and if necessary serviced, it would be recommended that the SR150 be tested with another antenna cable and/or antenna. If opting for the latter, one would simply unplug the currently installed antenna from the SR150, plug in the replacement cable and antenna (leaving them right alongside the SR150), and then power on the SR150. Should the SR150's Antenna Status LED be green and not flashing, then fault would have been isolated to the previously installed antenna cable and/or antenna.