[CA] [CA11] No downvision after update...

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum Tie1on,

A MFD running LightHouse 3 or LightHouse II software may be forced to reload the software by performing the following steps:
1) switch the MFD OFF
2) insert the microSD memory card containing the downloaded and then extracted LightHouse 3 software update files into the MFD's memory card reader
3) switch the MFD ON ... the MFD will then automatically update the MFD's software ... progress of such appears as white text commands / messages being displayed on the MFD's screen

Should the problem persist following the software update, then it is recommended that your waypoint, route, and track data be backed up to a microSD memory card and that a Factory Reset command (HOME->SETTINGS->THIS DISPLAY->FACTORY RESET) be executed and that afterwards the MFD's settings be manually reconfigured and backed up waypoint, route, and track data be retrieved.