Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] [CA11] Raymarine A128 and S1G to NMEA 2000

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Raymarine A128 and S1G to NMEA 2000
11-27-18, 11:27 AM (This post was last modified: 11-27-18 12:50 PM by Chuck - Raymarine - Moderator.)
Post: #3
Daleo56 Offline
Junior Member
**
 		Posts: 3
Joined: Nov 2018
Reputation: 0
RE: [CA11] Raymarine A128 and S1G to NMEA 2000
Thank you for the quick response. So do I leave the P70 connected to the S1G Seatalk port and then connect the second S1G Seatalk port to the converter? The A128 will just connect directly to the backbone? I have attached a simple diagram of the current network. I plan to eventually replace each Garmin with an Axiom type unit over the next few years.

Thank you again,

Tim


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Raymarine A128 and S1G to NMEA 2000 - Daleo56 - 11-27-18 11:27 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication