[CA] [CA11] Multiple Navionics charts in e95/e7?

[Hartley]

Hello!

I recently enhanced my e95 system by adding an e7 MFD (purchased from RayMarine). Its connected via RayNet (Ethernet) and everything was working 100% -- until I loaded two Navionics chart cards.
Before this, I had my Navionics USA/Canada card in SD1 on the e95, a mostly empty storage card in SD2, my Lighthouse charts (NOAA, Blue Latitudes and now NV) in SD1 on the e7 and another empty storage card in SD2. I renewed my South America/Caribbean Navionics card and loaded it into SD2 on the e95 - but now I cannot access my US/Canada Navionics charts! All of my lighthouse & NV charts are available (including multiple versions of certain NOAA charts), but only the latest date Navionics charts show up in "Chart Select"
I also tried removing the SA card and installing it in SD2 in the e7, and the same thing happens - only the latest Navionics charts (South America/Caribbean) show up and the US/Canada are not available.
Interestingly, both MFDs exhibit the same problem - and the South America/Caribbean entries in the "Chart Select" list do not show the renewal date and other info - the entry is blank except for the "Nautical Chart" and "SonarChart (Not for Navigation)" lines. Removing the "extra" Navionics card restores normal operation, regardless of which card is left in.

What is REALLY odd is that both chart cards show up in the initial bootup "accept" screen, with proper dates and titles showing.

Now I can work around this, as the South America card has Florida on it, and I can remove & replace the cards as needed, but this seems a rather silly limitation!

Both of my MFDs (and everything else in my system) have the latest (and, sadly, last) LH2 firmware version installed.

Hartley
S/V Atsa