Raymarine forum / Raymarine Forums / AIS v / [CA] [CA11] Silent mode via C80 Mdf for ais 700

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Silent mode via C80 Mdf for ais 700
12-06-18, 02:43 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Silent mode via C80 Mdf for ais 700
Antonio,

Please click here to view a FAQ addressing this subject. Have you satisfied all of the requirements listed therein to display AIS data within the MFD's Chart application? If so, then AIS targets should be plotted on the MFD's screen and listed within the MFD's AIS List. Unfortunately, my initial response had incorrectly referenced the command sequence for commanding Silent Mode via an E-Series Classic MFD instead of a C-Series Classic MFD. Please refer to my updated response to your previous thread addressing Silent Mode.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Silent mode via C80 Mdf for ais 700 - Chuck - Raymarine - Moderator - 12-06-18 02:43 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication