The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] VHF radio won't interface with NMEA 2000 / MFD's
12-11-18, 11:25 AM (This post was last modified: 12-11-18 03:33 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] VHF radio won't interface with NMEA 2000 / MFD's
I purchased a new Standard Horizon Quantum GX6000 VHF radio, which has a NMEA connection on the back panel. I purchased the correct SeaTalk ng spur cable to connect the radio to my Raymarine networked MFD's (e125 / a65 / a68 / p70r / Evolution autopilot / ACU 200 / i70 / Raymarine SeaTalk1 to SeaTalkng converter / HS5 network switch / Lighthouse 19 latest version. The GX6000 has the latest versions of their firmware.

However, I cannot get a GPS reading on the VHF. The diagnostic screen for devices on my a68 "master" shows it "sees" the VHF, but that's it.

Appreciate any help or advice please!


Attached File(s) Thumbnail(s)
       
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] VHF radio won't interface with NMEA 2000 / MFD's - OneandAll - 12-11-18 11:25 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)