[CA11] AIS650 NMEA Issues

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] AIS650 NMEA Issues

12-12-18, 10:50 AM (This post was last modified: 12-12-18 10:58 AM by Chuck - Raymarine - Moderator.)

Post: #5

grahamopenshaw Offline

Junior Member

Posts: 9
Joined: Aug 2017
Reputation: 0

RE: [CA11] AIS650 NMEA Issues

Thanks Chuck,
The following is working:
A. 4800 output connected to the Raymarine VHF and the Icom 802 SSB. Both are receiving position and time OK.

B. 38400 output connected to the Digital Yacht Lifeguard AND looped back into the 38400 inputs.

I am concerned about this being potentially unreliable but if I disconnect the loop back on the 38400 then the 4800 output immediately stops working.

Ideas?

Graham

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] AIS650 NMEA Issues - grahamopenshaw - 12-09-18, 10:00 PM

RE: [CA11] AIS650 NMEA Issues - Chuck - Raymarine - Moderator - 12-10-18, 01:47 PM

RE: [CA11] AIS650 NMEA Issues - grahamopenshaw - 12-11-18, 06:29 PM

RE: [CA11] AIS650 NMEA Issues - Chuck - Raymarine - Moderator - 12-12-18, 09:15 AM

RE: [CA11] AIS650 NMEA Issues - grahamopenshaw - 12-12-18 10:50 AM

RE: [CA11] AIS650 NMEA Issues - Chuck - Raymarine - Moderator - 12-12-18, 11:03 AM

RE: [CA11] AIS650 NMEA Issues - grahamopenshaw - 12-12-18, 11:11 AM

RE: [CA11] AIS650 NMEA Issues - Chuck - Raymarine - Moderator - 12-12-18, 11:38 AM

User(s) browsing this thread: 1 Guest(s)