Raymarine forum / Raymarine Forums / Fishfinders v / [CA] [CA11] Dragonfly 4 pro slow in Chart mode

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Dragonfly 4 pro slow in Chart mode
12-12-18, 04:54 PM (This post was last modified: 12-12-18 04:55 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Dragonfly 4 pro slow in Chart mode
Welcome to the Raymarine Forum Palio,

The reported slow down may be linked to the Sonar Logging feature (recommend that it be configured OFF), the MFD's software state (try performing a System Settings Reset (TOOLS & SETTINGS->BACKUP & RESET->USER SETTINGS->SETTINGS RESET) ... be certain to configure the Sonar Logging feature off afterwards), sonar log storage (cut the sonar logs (Navionic/UserData) from the chart card and move to a computer), a problem with the chart card (remove sonar logs and update with Navionics Freshest Data Updates), or a problem with the display's memory card reader (send the display to Raymarine’s Product Repair Center to be bench checked / serviced.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Dragonfly 4 pro slow in Chart mode - Chuck - Raymarine - Moderator - 12-12-18 04:54 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication