The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Instruments v / [DG] [DG11] ST50 shortcut?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG11] ST50 shortcut?
12-22-18, 01:48 PM (This post was last modified: 12-24-18 08:35 AM by Chuck - Raymarine - Moderator.)
Post: #1
LaurensenKitty Offline
Junior Member
**
 		Posts: 3
Joined: Jun 2018
Reputation: 0
[DG11] ST50 shortcut?
I have a range of ST50 instruments (speed/log, wind, vmg, compass/steering). Depth counter is ST60. The speed/log has encountered an issue. The display had the backlight on, and was showing weird figures, alternating with speeds from 0 to 2,5 knots while the boat speed was over 6 knots. Simultaneously, my charge controller was showing that quite a lot of amperes were being drawn. So I suspect there is a shortcut current somewhere in the system. After I had took power off the instruments on my switchboard, and turned it back on a couple of minutes later, the bug did not reappear. I suspect it was because it switched to default setting: backlight off.

How do I troubleshoot?

Or should I replace the unit? Is it possible to just replace with a new i60?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[DG11] ST50 shortcut? - LaurensenKitty - 12-22-18 01:48 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication