The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / General Discussions v / Powering products which feature a power cable / terminals

Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Powering products which feature a power cable / terminals
01-02-19, 09:20 AM
Post: #1
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
Powering products which feature a power cable / terminals
Powering products which feature a power cable / terminals

Raymarine has and continues to produce products having low power consumption requirements which are designed to be powered via their respective SeaTalkng / NMEA 2000, Ethernet, or SeaTalk communications interface. Devices which are designed to be powered through such a communications interface will lack power cable / power leads / power terminals. Should a device feature a power cable / power leads / power terminals then is not designed to be powered via its communications interfaced and must instead be powered via its power cable / power leads / power terminals.


RAYFAQ#
Find all posts by this user
Thread Closed 


Messages In This Thread
Powering products which feature a power cable / terminals - Chuck - Raymarine - Moderator - 01-02-19 09:20 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication