Raymarine forum / Raymarine Forums / Instruments v / [CA] [CA11] ST-60 wind

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] ST-60 wind
01-02-19, 03:27 PM (This post was last modified: 01-02-19 03:27 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] ST-60 wind
Welcome to the Raymarine Forum Pete,

Indeed the R28170 Masthead Only would be purchased to replace the currently installed wind transducer. The same keyway is used with the current transducer. Accordingly, it should only be necessary to unscrew the locking collar and unplug the currently installed transducer from its base and then plug in the R28170 Masthead and secure it in place with its locking collar.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] ST-60 wind - Pete Lee - 01-02-19, 02:57 PM
RE: [CA11] ST-60 wind - Chuck - Raymarine - Moderator - 01-02-19 03:27 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication