[CA] [CA11] i60 : no true wind, no VMG, no wind vane mode

[jpiebrig]

Hi Chuck,

I have check all :

* I put a Spur 12 volts cable straight, without switch, on the same Raymarine Seatalk 5-Way Connectors as the I60 and turn off 12 volts from Acu-400 (also turn off ACU-400). It is the same, no true wind and no detection from C95.
Batteries are full, connections are good.

* the two SeaTalkng Termination Plugs are good : 120 ohms between the CAN_H and CAN_L pins.

* I used the spur cable from the i60 with the P70. P70 is still working and it is detected by the C95.
I used the SPUR cable from the P70 with the i60, but same problem, no true wind, ..., and i60 is not detected.

It seems that the i60 as no communication with the other instruments.

I will contact the UK Product Repair Center.

Thanks a lot for your help.

jpiebrig