Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] [CA11] Network with E7, Axiom and HS5

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Network with E7, Axiom and HS5
01-09-19, 08:33 AM
Post: #8
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Network with E7, Axiom and HS5
Peter,

Q1. Should it be possible to connect the MFD e7 directly to the free blue port on the STng converter no.1 ? as there is a terminal plug on the STng converter no2 also, maybe enough with one terminal plug?
A1. Negative. You will need to add a spur socket to accommodate the e7 MFD and then properly terminate the backbone with a SeaTalkng Termination Plug within the unused spur socket at each end of the backbone.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Network with E7, Axiom and HS5 - Chuck - Raymarine - Moderator - 01-09-19 08:33 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication