[CA] [CA11] Upgrades to my 2006 Four Winns

[morowsky]

I have attached a current wiring diagram and diagrams for the configuration that I believe will work (4 diagrams).

There are no NMEA 0183 connections to the existing S1 or anything on its SeaTalk backbone, so I do not believe that a loop will be an issue. I have decided to stay with the current AutoPilot. I do have a couple of questions:

1. Is this a workable design?
2. If I want to get better heading information for AIS and Radar, etc., could I add an EV-1 Sensor core (Conneccted to the SeaTalkng), and remove the Fluxgate Compass from the S1? Will the appropriate heading data needed by the S1 pass through the SeaTalk to SeaTalkng Conversion?
3. The Axiom Pro 9 is a RVX model. Will I be ableto view RealVision 3D on the other MFD, a Axiom 9 without SONAR?

4. Will or could there be issues with all the data (Heading, GPS, depth, AIS, etc.) on the SeaTalkng network getting onto the SeaTalk network?

Thank you again for all your assistance.

Steve