[CA] [CA11] e125, HS5, CAM220ip - no communications
|
01-14-19, 10:29 AM
(This post was last modified: 01-16-19 11:06 AM by Chuck - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
[CA11] e125, HS5, CAM220ip - no communications
I am unable to see newly installed 2 each CAM220ip on my e125. The CAM220ip cameras are connected to HS5 through CAT6 cable to A80247 adapter. The lights on the HS5 on the camera ports are not flashing. Have sonar connected to same HS5, sonar port lights are flashing and can see sonar on e125. If I connect PC to CAT6 cable, unplugging from A80247 I can see the camera.
|
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[CA11] e125, HS5, CAM220ip - no communications - jamoritz - 01-14-19 10:29 AM
RE: [CA11] e125, HS5, CAM220ip - no communications - Chuck - Raymarine - Moderator - 01-14-19, 06:33 PM
RE: [CA11] e125, HS5, CAM220ip - no communications - jamoritz - 01-15-19, 08:15 AM
RE: [CA11] e125, HS5, CAM220ip - Chuck - Raymarine - Moderator - 01-15-19, 10:16 AM
|
User(s) browsing this thread: 1 Guest(s)