Raymarine forum / Raymarine Forums / Multifunction Displays v / e125 - VHF DSC Intergration via Seatalk

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
e125 - VHF DSC Intergration via Seatalk
05-17-16, 03:36 PM
Post: #5
MattDonovan Offline
Junior Member
**
 		Posts: 5
Joined: May 2016
Reputation: 0
RE: e125 - VHF DSC Intergration via Seatalk
Chuck,
the RS232 /422 is an eye opener.

I am going to try the 7m cable for the 4800. If it doesn't work is there an NMEA expander in the Raymarine product line or is there one that you recommend?

Also, I imagine both the input and output would need to be "boosted" for want of a better term, so does that mean I need an expander on the output at both the radio and the MFD.

If the VHF is using RS-422 do I need a converter for the MFD to be able to read this and for the VHF to read the output from the MFD?

Thanks

Matt
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: e125 - VHF DSC Intergration via Seatalk - MattDonovan - 05-17-16 03:36 PM

Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication