[CA] [CA11] Airmar transducer/e97 issue

[marinemarkwenn]

The Airmar P319 Transducer ceased working on our Zodiac 753. We are using an e97 as master MFD and an e95 slave display.
A new transducer P319 was purchased and wired in temporarily to ensure function prior to mounting it.
We have checked all cables for continuity and tried to run diagnostics but get the following error:
"The following devices are preventing data source selection: ISO(05 6c 7a e7 00 8c 8c c0) CAN(43)"
We have the following devices connected as well:
4kW 18" HD Color Radome (SeaTalkHS)
Raymarine i70 Display (STng)
Raymarine RS-150 (STng)
Raymarine AIS650 (STng)
as well as the e95 slave MFD

The cabling from the MFD is as follows: from the rear of the e97, Airmar E66066 connected to a MM-Ray 33-624-01 (Airmar Transducer Cable # C47...CC1225 ROHS 11/17) then to the cable that is hardwired to the transducer.

We are not receiving any transducer/depth information, we have gone into the "Fishfinder" settings and selected the correct transducer but still no luyck...please help!
The software version running on the e97 is v17.46-00404