Raymarine forum / Raymarine Forums / Instruments v / [TG] [TG11] ST60+ Low Depth Alarm Setting Blocked?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] ST60+ Low Depth Alarm Setting Blocked?
01-18-19, 07:48 AM (This post was last modified: 01-20-19 08:10 AM by Chuck - Raymarine - Moderator.)
Post: #3
Derek - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,416
Joined: Nov 2017
Reputation: 9
RE: [DG11] ST60+ Low Depth Alarm Setting Blocked?
Hi Dave,
In addition to the advice given by my colleague, check the Shallow alarm Lock accessed through the USER calibration is turned OFF. There is a lock applied to the shallow alarm value to prevent inadvertent alteration.

Regardss
Derek
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [DG11] ST60+ Low Depth Alarm Setting Blocked? - Derek - Raymarine - Moderator - 01-18-19 07:48 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication