[TG] [TG11] ST60+ Low Depth Alarm Setting Blocked?

[[email protected]]

HI Derek,
Thanks for the quick reply.
I guess the ST60+ Depth might be faulty but I’ll re-check all the settings you mentioned and let you know how it goes.

Regarding your comment on powering the ST60+ displays via the ST1/STng converter, this is specifically shown in section 4.8 of the converter manual.
Is it ok, or is there some real advantage to separating the power supplies?

In my system, nothing else is powered from the STng network, so perhaps I only need one power supply to the ST60 instruments and none for the converter/STng network?

Cheers
Dave