Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [[CA11] Axiom MFD with Camino-108 AIS

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [[CA11] Axiom MFD with Camino-108 AIS
01-23-19, 01:20 AM (This post was last modified: 01-23-19 08:32 AM by Chuck - Raymarine - Moderator.)
Post: #3
Tenedos Offline
Junior Member
**
 		Posts: 8
Joined: Jan 2019
Reputation: 0
RE: [[CA11] Axiom MFD with Camino-108 AIS
Thank you Chuck. According to manual, what I see is "Uncertain"(Dashed outline), they are also flashing in my scenario (switching between solid green to dashed gray and back). To be clear these are way out of danger zone and are not marked as dangerous, they are not red.

What exactly is "Uncertain" and when is a target marked as one?Here is a screenshot of blinking, while it is grayed out. This switches to green and this grayed out state continuously. AIS target locations are updated so I don't know what the actual impact is or what this blinking indicates.


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [[CA11] Axiom MFD with Camino-108 AIS - Tenedos - 01-23-19 01:20 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication