Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Bridging AIS650 to e120-widescreen
01-23-19, 09:30 AM (This post was last modified: 01-23-19 09:30 AM by Chuck - Raymarine - Moderator.)
Post: #8
RE: [CA11] Bridging AIS650 to e120-widescreen
ROM,

As indicated, the MFD's software cannot be updated with a SD card ... it must be updated with a CF memory card. On may test the operational state of the MFD's memory card reader by either verifying that detailed Navionics cartography can be displayed within the MFD's Chart application. Alternatively, one may verify the operational state of the MFD's memory card reader by attempting to save waypoints stored within the MFD's memory to the CF memory card ... if the MFD is successful, then it will notify the user accordingly.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Bridging AIS650 to e120-widescreen - Chuck - Raymarine - Moderator - 01-23-19 09:30 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)