Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] A65 Compatability

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] A65 Compatability
01-28-19, 08:14 AM
Post: #23
Derek - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,416
Joined: Nov 2017
Reputation: 9
RE: [CA11] A65 Compatability
Hi Tim,

What else is in the STng network? are all the displays operating correctly and sharing data?
If you are just testing using the converter on it's own, make sure that you have the blue terminators in each end of the converter block - ie in the two blue sockets, the block is powered with 12v and the Seatalk1 network is also powered independantly and that the red wire in the SeaTalk1 cable going to the converter is cut and insulated, (this prevents the converter being powered BOTH by STng and SeaTalk1 which is incorrect)

Can you attach a diagram of exactly what you have connected and how?
Regards
Derek
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] A65 Compatability - morepower - 09-29-18, 02:06 AM
RE: [CA11] A65 Compatability - Derek - Raymarine - Moderator - 01-28-19 08:14 AM

Forum Jump:


User(s) browsing this thread: 10 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication