Wind instrument malfunction

[Bill Plaia]

I did this and it made no difference in the display. Wind speed was 0 or very low, while my handheld anemometer is reading around 20 at deck level. Wind direction was radically different than reality and moving all over the place or no indicator at all. I have a depth transducer, flux compass, and wind instrument hooked to my ITC5. I do not have speed and temperature hooked up and I have my rudder indicator hooked directly to the acu200. I noticed that while running the test that the indicator lights on the iTC-5 for the depth and compass were solid on. The speed/temp and rudder lights were flashing. I assume that when the iTC-5 sees a valid transducer the light stays solid and when it doesn't it flashes. The wind indicator light is flashing. Does that help?