[CA] [[CA11] Axiom MFD with Camino-108 AIS

[Chuck - Raymarine - Moderator]

Tenedos,

Please note that we have not previously received any reports of this symptom with systems using Raymarine or other third party AIS receivers. This is the first report of a customer using the subject AIS receiver. It is highly unlikely that the SeaTalk to SeaTalkng Converter would be responsible for the reported issue. That said, next step in fault islolation which I would recommend is to unplug all devices from the backbone except for the MFD, GPS sensor (if any), and the third party AIS device.

Should the problem persist when running the stripped down system, then it would be recommended that a NMEA 2000 data log be created. To do so, the file within the attached compressed folder would be extracted to the root level directory of a microSD memory card. After the problem has been reproduced, the microSD memory card containing this file should be inserted into the MFD's memory card reader and the system should be operated for at least six minutes. The resulting NMEA 2000 log file should then be attached to this thread to permit it to be included within a problem report to be logged on this subject.