The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Updating eS MFDs to LH 3.8.97

Post Reply 
 
Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Updating eS MFDs to LH 3.8.97
01-31-19, 06:55 PM (This post was last modified: 02-01-19 10:35 AM by Chuck - Raymarine - Moderator.)
Post: #1
Istream Offline
Junior Member
**
 		Posts: 20
Joined: Sep 2016
Reputation: 0
[CA11] Updating eS MFDs to LH 3.8.97
I downloaded the LightHouse 3.8.97 update for my eS128, which includes both a "raymarine_atom-3.8.97.upgrade.iso" file as well as a "ray_mfd_AtomCartographyRX5v1_22.upgrade.iso" file. There's a note in the zip file that says, "Add each ISO file onto a seperate uSD card - otherwise they will not install correctly".

I put the 3.8.97.upgrade file on the SD card in the upper slot and put the cartography file on the SD card in the lower slot. The card for the cartography file also contains my Navionics charts.

The software update to 3.8.97 went fine but it's unclear whether the system performed the cartography update. Can you tell me if I did anything wrong and, if not, how to confirm that the cartography update completed successfully?

Thanks.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Updating eS MFDs to LH 3.8.97 - Istream - 01-31-19 06:55 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication