[LW] [LW11] System Set Up Question?

[Louise - Raymarine - Moderator]

Dear Sadey,

Many thanks for your query.

You can connect the high chirp transducer directly to the eS128 and also have the legacy ST60 transducer connected to the ITC-5 on the same network. The eS128 will see the high chirp transducer as the priority transducer, if this fails and is not seen, the MFD will then automatically look for the next depth source - in this case it will be the legacy ST60 transducer and use this as a depth data source.

The eS127 will share the image from the high chirp transducer on the eS128 over Raynet.

I hope this helps.

Many Thanks
Louise