[TG11] ST2000+ not heading correctly in track mode

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[TG] [TG11] ST2000+ not heading correctly in track mode

02-02-19, 12:01 PM

Post: #3

[email protected] Offline

Junior Member

Posts: 42
Joined: Sep 2018
Reputation: 0

RE: [TG11] ST2000+ not heading correctly in track mode

Hi Tom,
thanks for the advice, what I have found I needed to do to get the system to work was to:
- set the variation to 13E on the ST 2000+
- set the variation to zero on the A70D
- set the bearing mode to magnetic on the A70D

The boat tracks perfectly now.
I think the problem was that both the ST2000 and the A70D were sending variation to the system and this was causing confusion.

thanks
Dave

« Next Oldest | Next Newest »

Messages In This Thread

[TG11] ST2000+ not heading correctly in track mode - [email protected] - 01-17-19, 04:02 PM

RE: [TG11] ST2000+ not heading correctly in track mode - Tom - Raymarine - Moderator - 01-17-19, 08:56 PM

RE: [TG11] ST2000+ not heading correctly in track mode - [email protected] - 02-02-19 12:01 PM

RE: [TG11] ST2000+ not heading correctly in track mode - Chuck - Raymarine - Moderator - 02-08-19, 02:38 PM

RE: [TG11] ST2000+ not heading correctly in track mode - tlinnant - 05-28-20, 05:01 AM

RE: [TG11] ST2000+ not heading correctly in track mode - Tom - Raymarine - Moderator - 05-29-20, 02:26 AM

RE: [TG11] ST2000+ not heading correctly in track mode - tlinnant - 05-29-20, 02:51 AM

RE: [TG11] ST2000+ not heading correctly in track mode - Tom - Raymarine - Moderator - 05-31-20, 09:50 PM

User(s) browsing this thread: 1 Guest(s)