European Union (.eu)
United States (.com)
United Kingdom (.co.uk)
Australia (.com.au)
Denmark (.dk)
Finland (.fi)
France (.fr)
Germany (.de)
Italy (.it)
Norway (.no)
Netherlands (.nl)
Spain (.es)
Sweden (.se)
Search
Member List
Calendar
Help
Raymarine forum
/
Raymarine Forums
/
Autopilots 
/
[CA] [CA11] Interface Garmin 742xs to Ray ST8001 Autopilot
/
[CA] [CA11] Interface Garmin 742xs to Ray ST8001 Autopilot
|
[CA] [CA11] Interface Garmin 742xs to Ray ST8001 Autopilot
|
|
02-04-19, 10:31 AM
(This post was last modified: 04-08-19 10:07 AM by Chuck - Raymarine - Moderator.)
Post: #2
|
|||
|
|||
|
RE: [CA11] Interface Garmin 742xs to Ray ST8001 Autopilot
Welcome to the Raymarine Forum YoBub,
It is indeed possible to do as you have suggested. In this case, the NMEA 0183 output of the third party chartplotting product may be interfaced to the NMEA 0183 input terminals of the ST8001. As the Raymarine equipment which you have identified is not designed to support more than one source of GPS data, it is recommended that the GPS sensor which is currently supplying GPS data to the Raymarine system be disconnected, to then permit GPS data from the third party chartplotting product to supply GPS data to the system. |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
[CA11] Interface Garmin 742xs to Ray ST8001 Autopilot - YoBub - 02-03-19, 03:26 PM
RE: [CA11] Interface Garmin 742xs to Ray ST8001 Autopilot - Chuck - Raymarine - Moderator - 02-04-19 10:31 AM
RE: [CA11] Interface Garmin 742xs to Ray ST8001 Autopilot - Chuck - Raymarine - Moderator - 04-08-19, 10:22 AM
|
User(s) browsing this thread: 1 Guest(s)