Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] Sea Talk failure

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Sea Talk failure
02-06-19, 01:56 PM (This post was last modified: 02-06-19 01:58 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Sea Talk failure
Welcome to the Raymarine Forum Brian,

It is not recommend that an X5 be used with a rotary drive. The X5 was exclusively suited for use with wheel drives. With regard to rotary drives and SPX autopilots, the SPX10 should have been installed for use with Type 1 Rotary Drives and the SPX30 should have been installed for use with Type 2 Rotary Drives. Please note that Raymarine can still service SPX autopilot course computers. Accordingly, it would be recommended that the X10 autpilot course computer be sent to Raymarine’s Product Repair Center to be bench checked / serviced or that the autopilot be replaced with an T70155 Evolution EV-200 Sail.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Sea Talk failure - 88driver - 02-06-19, 01:37 PM
RE: [CA11] Sea Talk failure - Chuck - Raymarine - Moderator - 02-06-19 01:56 PM
RE: [CA11] Sea Talk failure - 88driver - 02-06-19, 02:17 PM
RE: [CA11] Sea Talk failure - 88driver - 02-06-19, 03:22 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication