[CA] [CA11] Proper power config for E22158

[Chuck - Raymarine - Moderator]

amajamar,

The diagram appears to be correct in all but possibly one area ... NMEA 0183 connection to the course computer. While connecting the system for one way communications such that the autopilot only receives data from the rest of the system will work, having the autopilot course computer transmit data back to the system may cause a data loop, preventing the chartplotter from cancelling navigation. Accordingly, you may want to try setting up the system as you have diagrammed and if you find that you are unable to cancel navigation (i.e. Go To Cursor / Waypoint or Follow Route) and then command navigation to a new destination, then it would be necessary to disconnect the leads from the autopilot course computer's NMEA 0183 OUT terminals.