The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Newer MFD compatibility with e95

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Newer MFD compatibility with e95
02-07-19, 08:36 PM (This post was last modified: 02-08-19 02:02 PM by Chuck - Raymarine - Moderator.)
Post: #1
Rdubs Offline
Junior Member
**
 		Posts: 23
Joined: Jul 2017
Reputation: 0
[CA11] Newer MFD compatibility with e95
Hi,
Just completed a passage on my boat and one of my two e95's MFD's stopped working. With power applied, it shows the "Raymarine" logo upon startup for about 5 seconds, then powers off. Then after a few seconds it tries to power back on again, logo shows for 5 seconds, then powers back off. Repeat. I removed the unit and some water came out of it, not sure how it got in but I am pretty sure it is fried.

Instead of just buying a replacement e95, is it possible to "mix and match" where I could buy a newer model MFD to replace the broken e95 and have it work alongside the currently functional e95? The equipment integrated into the network is a radar, wind sensor, depth/speed transducer, CP100 and CP200 sonars, autopilot and Fusion radio.

Many thanks,
'Dubs
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Newer MFD compatibility with e95 - Rdubs - 02-07-19 08:36 PM

Forum Jump:


User(s) browsing this thread: 4 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication