Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Use the ECI-100 Universal Engine and Control Interface with our GS Series MFD?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Use the ECI-100 Universal Engine and Control Interface with our GS Series MFD?
02-13-19, 02:10 PM (This post was last modified: 02-13-19 02:11 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Use the ECI-100 Universal Engine and Control Interface with our GS Series MFD?
Welcome to the Raymarine Forum polingk,

Per the ECI-100's webpage, the ECI-100 is exclusively compatible with Volvo, Yamaha, Yanmar, Honda, and Caterpillar engine systems. You may want to check with Cummins to determine whether your Cummins engines are compatible with Mercury Marine's SmartCraft to NMEA 2000 engine gateway. If so, then the third party engine gateway would simply be interfaced as a spur to the system's SeaTalkng / NMEA 2000 backbone.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Use the ECI-100 Universal Engine and Control Interface with our GS Series MFD? - Chuck - Raymarine - Moderator - 02-13-19 02:10 PM

Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication