[DG] [DG] Thermal Camera

[tegarre]

Thank you.

I have my T-200 connected to a monitor and projecting images properly. The T-200 camera is connected to a PoE injector and then a LAN cable from it's PoE to the Network switch. I can connect my Windows 10 laptop to the network switch and bring up the web page for the T-200 and I can control the camera from my computer.

I connected a FLIR JCU-3 controller to my T-200 thermal camera. The JCU-3 is connected to a Raymarine PoE injector. I have a LAN cable connected from the PoE to the Network switch. I can bring up the web page on my computer for the JCU-3. I couldn't change the JCU-3 IP address to a static IP address and domain to match the T-200. However, I changed the IP address and domain on the camera to match the JCU-3. The JCU-3 stopped flashing, indicating pairing to the camera, but it can't control the T-200 from the JCU-3.

Is there something I need to do differently?

Terry