[CA] [CA11] Auto Pilot pump location

[ThreeAces]

Hi Chuck,
Thank you for your response! After contacting the boat manufacturer and your response above I have identified where to locate the pump along with the Ev-1 (under deck near the motors). This means the SeaTlkng cable and power cable will need to run from the center console back to the pump and EV-1. Since one is power and one is communications, how much distance do I need to provide between those two cables to ensure no noise transfer? The boat manufacturer provided a 2" diameter tube as a thread through cable run. It would be easiest to allow these two cables to run in that tube side-by-side, but I have my doubts. Thank you!