[CA] [CA11] New installation multiple power inputs

[pfrank]

Again, many thanks, Chuck!

I have attached the final arrangement for my system (along with the original layout for reference). Changes are:

1) Remove power supplies to the ST60+ Wind and NMEA 2000 backbone, leaving only one power supply to the STNG backbone

2) Rewire the Axiom 9 from the NMEA 2000 backbone to the existing STNG converter in the instrument pod using an A06045 adapter cable

3) Wire the Fusion stereo directly to the STNG backbone using an A06075 cable

All this allowed me to remove a large chunk of wiring including the complete NMEA backbone and the incorrect spur formerly connecting the NMEA backbone to the STNG backbone.

Two days of hard sailing this past weekend and all worked great!