The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Radar v / [CA] [CA11] RD218 and the C120

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] RD218 and the C120
02-22-19, 07:04 PM (This post was last modified: 02-23-19 08:45 AM by Chuck - Raymarine - Moderator.)
Post: #1
philipdawsonladds Offline
Junior Member
**
 		Posts: 5
Joined: Feb 2019
Reputation: 0
[CA11] RD218 and the C120
Can anyone help bring some clarity for me? I have a C120 installed in my SC35 and want to add a compatible radar. The RD218 is stated to be compatible on the Raymarine site. I have found some new ones but they are described as being either E52079 or E52065 - does anyone know the difference - will either of them work with the C120? I did find a note somewhere saying that the RD218 serial number needed to be 530158 or higher to be compatible (naturally one that I have found is 510056!).

Also...any advice on running the cable from the arch? I can see where the ceiling panel is removed and could probably remove the STBD speaker to pull the cable down. From then on....any suggestions? Thanks
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] RD218 and the C120 - philipdawsonladds - 02-22-19 07:04 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication