Raymarine forum / Raymarine Forums / Radar v / Radar -- no data source followed by operation

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Radar -- no data source followed by operation
05-20-16, 12:20 AM (This post was last modified: 05-25-16 03:46 PM by Chuck - Raymarine - Moderator.)
Post: #8
michaellutz Offline
Junior Member
**
 		Posts: 8
Joined: Feb 2016
Reputation: 0
RE: Radar -- no data source followed by operation
I lead you down the wrong path. When I repeated this experiment with the battery voltage down to 12.0 V, after the instruments sat overnight, it started up immediately. I am nevertheless installing a new house bank next week. However my current house bank, although old, still certainly can produce the 5-10 Amps demanded

It has been determined that my radome is analog. I understand Raymarine only sells digital radars now. If the problem turns out to be with the radome, does my E-120 support a digital radome? If yes, is any modification required?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Radar -- no data source followed by operation - michaellutz - 05-20-16 12:20 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication