[CA] [CA11] AXIOM PRO RVX & Radar "RD418HD"

[Guilherme]

Chuck I'm very grateful to try to help me.

Here are the answers to the questions:

1) Q: Is the radome being powered from a dedicated breaker / switched circuit? For clarification purposes, have you replaced the Digital Radar Cable?
A: Dedicated

2) Q: Have you modified / spliced ​​/ repaired the Digital Radar Cable or Raymarine Ethernet Cable (if any were used)?
A:No

3) Q: Have you tried connecting the Digital Radar Cable to the MFD's other Ethernet Network socket?
A: Yes I tried the two available network ports.

4) Q: Have you tried performing a Factory Reset to the MFD (were any knowledge of any previously interfaced radomes or open array pedestals) and then tested the system again?
A: Yes, I did this, at the time I updated the SW, to the latest version.

5) Q: When performing the latter, it is recommended that the radome power remain switched OFF until the MFD has completed rebooting to prevent the radome from entering sleep mode.
A: Yes, I have tried both ways.

thank you very much,

Guilherme.