[CA] [CA11] Heading Flash Offset

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum Ian,

The radar bearing alignment value should be stored within the radome or open array pedestal. Accordingly, swapping the MFDs should have not required any re-configuration of the radar bearing alignment. If the radar has been configured to head up mode and radar target returns associated with objects at 000 relative are not appearing in line with the ships heading marker, then the radar bearing alignment will need to be adjusted. It would be recommended that the Radar application's performance in head up mode be monitored to determine if any additional adjustment is required in the future. If so, then it may indicate a problem with the radar pedestal's circuitry, necessitating the it be sent to Raymarine’s Product Repair Center to be bench checked / serviced.