[CA11] Installing Navionics Platinum+ to G-Series MFD

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] Installing Navionics Platinum+ to G-Series MFD

03-08-19, 01:56 PM (This post was last modified: 03-08-19 02:30 PM by Chuck - Raymarine - Moderator.)

Post: #1

polingk Offline

Junior Member

Posts: 11
Joined: Feb 2016
Reputation: 0

[CA11] Installing Navionics Platinum+ to G-Series MFD

We have 2009 vintage dual G-series MFDs that came loaded with Navionics Platinum onto the hard drives. There were no cards for either unit and it has not been updated since new. I recently updated the firmware to the latest version in both MFD's with no issues. I have ordered separate Navionics Platinum+ for Vancouver B.C. & California/Oregon on CF cards.

Are there anything special we need to do to install this map software into both units? Cheers, Kevin

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] Installing Navionics Platinum+ to G-Series MFD - polingk - 03-08-19 01:56 PM

RE: [CA11] Installing Navionics Platinum+ to G-Series MFD - Chuck - Raymarine - Moderator - 03-08-19, 02:36 PM

RE: [CA11] Installing Navionics Platinum+ to G-Series MFD - polingk - 03-19-19, 02:24 PM

RE: [CA11] Installing Navionics Platinum+ to G-Series MFD - Chuck - Raymarine - Moderator - 03-19-19, 02:38 PM

RE: [CA11] Installing Navionics Platinum+ to G-Series MFD - polingk - 03-19-19, 06:04 PM

RE: [CA11] Installing Navionics Platinum+ to G-Series MFD - Chuck - Raymarine - Moderator - 03-20-19, 07:44 AM

RE: [CA11] Installing Navionics Platinum+ to G-Series MFD - polingk - 03-20-19, 12:08 PM

RE: [CA11] Installing Navionics Platinum+ to G-Series MFD - Chuck - Raymarine - Moderator - 03-20-19, 12:35 PM

RE: [CA11] Installing Navionics Platinum+ to G-Series MFD - polingk - 04-01-19, 02:02 PM

RE: [CA11] Installing Navionics Platinum+ to G-Series MFD - Chuck - Raymarine - Moderator - 04-01-19, 02:41 PM

User(s) browsing this thread: 2 Guest(s)