The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Fishfinders v / [TG] [TG11] Axiom MFD with Twin RV200's

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] Axiom MFD with Twin RV200's
03-09-19, 03:36 AM (This post was last modified: 03-11-19 12:07 PM by Chuck - Raymarine - Moderator.)
Post: #1
Diver01 Offline
Junior Member
**
 		Posts: 1
Joined: Jan 2019
Reputation: 0
[TG11] Axiom MFD with Twin RV200's
Hi, I have a pair of Axiom MFD's with twin RV200's through hull transducers. The whole rig and set up is only 3 months old. On my last trip the MFD's were intermittently not finding Transducers. Will the usual message to plug in and restart unit. I restarted on several occasions to rectify throughout the day. I thought this was a software issue so did an update back at shore and briefly tested and sounder worked on the trailer. Again on the trailer, I recently did another update and turned on sounder to check and MFD will not find transducers. I have performed factory reset, checked all transducer connections, checked voltage, reconnected to both head units and restarted and still nothing.
Could you please advise if there is any similar issues with the latest update (Possible software issue)? If not what is my next step to rectify?

Thanks in advance
Eddie


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[TG11] Axiom MFD with Twin RV200's - Diver01 - 03-09-19 03:36 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication