The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG11] Can you add an EV1 compass to an ST7000 autopilot?
03-17-19, 02:36 PM (This post was last modified: 03-18-19 07:42 AM by Derek - Raymarine - Moderator.)
Post: #1
[DG11] Can you add an EV1 compass to an ST7000 autopilot?
I have an ST7000 autopilot, an ES78 chartplotter and a Quantum (wifi) radar system on my 43' sailboat. I have a mix of SeaTalk (NMEA183) and SeaTalkNG (NMEA2000) network connecting them all up. The chartplotter uses the compass heading from the ST7000 fluxgate compass to superimpose the radar image on the chart. Because the old ST7000 fluxgate compass isn't very accurate, I often have a mismatch between the radar image and the chart of up to 20 degrees, depending on heading. Can I add an EV1 sensor core to my system to improve the accuracy of the radar and heading data on the chartplotter, without having to replace the ST7000 autopilot control unit, which is still working OK? Simon from Lund, BC
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[DG11] Can you add an EV1 compass to an ST7000 autopilot? - sbrissend - 03-17-19 02:36 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)