The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Axiom Pro - OK Button on Rotary Dial Not Working Properly

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom Pro - OK Button on Rotary Dial Not Working Properly
03-17-19, 02:43 PM (This post was last modified: 03-19-19 12:19 PM by Chuck - Raymarine - Moderator.)
Post: #1
Type1 Offline
Junior Member
**
 		Posts: 27
Joined: Feb 2019
Reputation: 0
[CA11] Axiom Pro - OK Button on Rotary Dial Not Working Properly
We recently replaced our e-series MFDs with three new Axiom Pro MFDs, two 12" and one 9". The centre "OK" button on all three MFDs only works about 75% of the time,which is very frustrating as we operate the system with the touchscreen locked out. We are running version 3.8.105.

Is this likely to be a hardware or software issue?

Thanks
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Axiom Pro - OK Button on Rotary Dial Not Working Properly - Type1 - 03-17-19 02:43 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication