Raymarine forum / Raymarine Forums / Product Selection Assistance v / [CA] [CA11] Replace C80 with Axiom 9

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Replace C80 with Axiom 9
03-18-19, 01:40 PM
Post: #11
TiaraCory Offline
Junior Member
**
 		Posts: 8
Joined: Mar 2019
Reputation: 0
RE: [CA11] Replace C80 with Axiom 9
"The c80 can be replaced with an AXIOM display, do you have a radar or sonar connected to the the c80 since this may affect what version of AXIOM you require, but in principle there is a straightforward upgrade to the c80, the AXIOM can use an adapter panel - A80564, however, if you chose the AXIOM PRO version, you would need to fabricate some form of new dash panel for the new display due to the different form factor - size and shape"

I found this as an answer in a previous thread. I have been unable to locate an adapter plate to convert from C80 to Axiom 9RV. Is this available? I cannot find it on the Raymarine website.

Thanks again
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Replace C80 with Axiom 9 - TiaraCory - 03-18-19 01:40 PM

Forum Jump:


User(s) browsing this thread: 4 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication