Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Uncommanded System Reboot - Axiom Pro
03-19-19, 06:38 AM
Post: #8
RE: [CA11] Uncommanded System Reboot - Axiom Pro
Chuck,
Here is my log of the most recent USR:

16 Mar 19; 1630
• While at anchor, I was checking routes to select the one I would use between Musha Cay and George Town. I inspected several routes using touch screen and uni-controller. A USR occurred.
• While the chart function came back in operation in 45-60 sec, It took more than 5 min before the GPS position became available again. Note: the GPS was fully active before the USR. The axiom is mounted in the cockpit with no obstructions overhead, only bimini canvas.
• It would be a great feature to have a fail-safe mode after a USR occurs: the Axiom boots up immediately to the last chart shown with vessel location.

I will provide an updated system configuration drawing within the next 36 hrs.

Per your suggestion, I am connecting the ST7002+ autopilot control head directly to the SPX30 via ST-1. However, Note: in the present configuration it communicates with the SPX30 via the ST-1 - ST-ng converter over the ST-ng backbone and it has worked flawlessly.

Attached are the diagnostics for the most recent USR incident.

Other data to follow.

...Joe
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Uncommanded System Reboot - Axiom Pro - JJRocchio - 03-19-19 06:38 AM

Forum Jump:


User(s) browsing this thread: 8 Guest(s)